In everyday speech, a student holding a heavy bag for an hour is "working hard". In physics, he does no work at all. Let us fix the definitions, and then use them.

Net work on the block equals the gain in its kinetic energy

Work

W = F d cosθ   |   unit: joule (J) = N m   |   dimensions: [M L² T⁻²]

Only the component of force along the displacement does work. Work is positive when the force helps the motion, negative when it opposes it (friction), and zero when the force is perpendicular (the centripetal force, or you holding the bag still).

Example: a 50 N force pulls a box 10 m, at 60° to the floor. W = 50 × 10 × cos 60° = 250 J.

Kinetic and potential energy

KE = ½mv²   |   PE = mgh   |   spring: ½kx²

A 1000 kg car moving at 20 m/s has KE = ½ × 1000 × 400 = 2 × 10⁵ J. Notice that kinetic energy goes with the square of speed, so going from 20 to 40 m/s takes the energy up four times.

The work-energy theorem

The net work done on a body equals the change in its kinetic energy.

W_net = ΔKE = ½mv² − ½mu²
Pushed block: a 2 kg block starts from rest, with a 10 N push, and 4 N of friction, over 5 m. Net force = 6 N, so W_net = 30 J. Then ½ × 2 × v² = 30, so v = √30 ≈ 5.48 m/s. No need for time or acceleration.

Conservative forces and conservation of energy

For gravity and springs, the work depends only on the endpoints, so mechanical energy KE + PE stays constant. For friction it does not, because part of the energy becomes heat. The total energy of the universe is conserved, but mechanical energy is not always.

Power

P = W/t = F v   |   unit: watt (W) = J/s   |   1 hp = 746 W
Lifting: a motor lifts a 100 kg load by 20 m in 40 s (g = 10). Work = mgh = 20 000 J, so P = 20 000 / 40 = 500 W.
Cruising car: an engine delivers 20 kW to the wheels at 25 m/s. F = P/v = 20 000/25 = 800 N, which is the resistive force balanced at that speed.

Kilowatt-hour

Your electricity bill counts energy in units, where 1 unit = 1 kWh = 3.6 × 10⁶ J. A 1.5 kW heater used 4 hours a day for 30 days uses 1.5 × 4 × 30 = 180 units. Many students confuse kW (power) with kWh (energy); one is a rate, the other an amount.

Efficiency

Efficiency = useful output / input. A machine can never have an efficiency of 100 %, because some energy always leaves as heat or sound.

Need a quick calculation? Try this free scientific calculator — it shows every step.

Try it yourself

Work-Energy Theorem Work, Energy & Power Collision Lab