Home / Mechanics / Collision Lab

Elastic & Inelastic Collision Lab

NEETJEEICSE
v₁: 0 m/s v₂: 0 m/s Total p: 0 kg·m/s Total KE: 0 J

The physics

Momentum is always conserved in a collision, regardless of type. Kinetic energy is conserved only when the collision is perfectly elastic (e = 1); some KE is lost as heat/sound/deformation for any e < 1.

Momentum conservation: m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Coefficient of restitution: e = (v₂ − v₁) / (u₁ − u₂)

v₁ = [(m₁ − e·m₂)u₁ + (1+e)m₂u₂] / (m₁ + m₂)
v₂ = [(m₂ − e·m₁)u₂ + (1+e)m₁u₁] / (m₁ + m₂)

For a perfectly inelastic collision (e = 0), both bodies move with a common final velocity: v = (m₁u₁ + m₂u₂)/(m₁+m₂) — you can verify this by setting e to 0 above and checking v₁ equals v₂ after impact.

Exam tip: a very common NEET/JEE question gives equal masses in a perfectly elastic collision — the two bodies simply exchange velocities. Set m₁ = m₂ and e = 1 here to see that directly.

Sample data: the same collision with different restitution

A 2 kg block at 3 m/s hits a 1 kg block at rest. The only thing changed is the coefficient of restitution e.

eVelocity of m₁ afterVelocity of m₂ afterTotal momentumKinetic energy afterEnergy lost
11.00 m/s4.00 m/s6.0 kg·m/s9.00 J0.00 J
0.51.50 m/s3.00 m/s6.0 kg·m/s6.75 J2.25 J
02.00 m/s2.00 m/s6.0 kg·m/s6.00 J3.00 J

Conditions: m₁ = 2 kg, u₁ = 3 m/s, m₂ = 1 kg, u₂ = 0.

Notice: total momentum is 6.0 kg·m/s in every row, but the kinetic energy is conserved only for e = 1 (elastic). For e = 0 (perfectly inelastic) the blocks move together at 2 m/s and 3 J of the initial 9 J is lost.

Quick answers

What is the momentum formula?
p = mv. The SI unit is kg·m/s and the dimensional formula is [MLT⁻¹]. Momentum is a vector.
What is the law of conservation of linear momentum?
If no external force acts on a system, its total momentum stays constant. It holds in every collision, elastic or inelastic.
What is the coefficient of restitution?
e = (relative speed of separation)/(relative speed of approach) = (v₂ − v₁)/(u₁ − u₂). It is 1 for an elastic collision and 0 for a perfectly inelastic one, where the bodies stick together.
What is impulse?
Impulse = FΔt = Δp, the change in momentum. The unit is N·s, the same as kg·m/s. A longer contact time means a smaller average force for the same change in momentum.

🎯 Practice Zone

Puzzle 1. ⚖️ Momentum is always exactly conserved in every collision (elastic, inelastic, or anything in between), yet kinetic energy is only conserved in perfectly elastic collisions. Why does one conservation law hold universally while the other is conditional?

Momentum conservation follows directly from Newton's third law — the two colliding bodies exert exactly equal and opposite forces on each other during contact, so their combined momentum change is always exactly zero, regardless of what happens to the bodies' shapes or internal structure during the collision. Kinetic energy conservation, by contrast, requires that NONE of the mechanical energy converts into other forms (heat, sound, permanent deformation) during the collision — a genuinely special, restrictive condition that only holds when the colliding materials are perfectly rigid and elastic. Real materials always dissipate at least some energy as heat or deformation, which is exactly why perfectly elastic collisions are an idealized limit rather than the everyday norm.

Puzzle 2. 🎱 In an elastic collision between EQUAL masses (one initially at rest), the moving object comes to a complete stop and the stationary object takes off with the exact original velocity — a complete "exchange" of motion. Why does this specific, clean exchange only happen for equal masses, not for any other mass ratio?

Working through the elastic collision formulas (v₁f=((m₁−m₂)v₁+2m₂v₂)/(m₁+m₂)) with m₁=m₂ causes the (m₁−m₂) term to vanish entirely, leaving v₁f=0 exactly (the first object stops completely) and correspondingly v₂f=v₁ (the second object takes on the first's exact original velocity). For any other mass ratio, both objects retain some nonzero velocity after collision — the complete "exchange" is a special mathematical coincidence of equal masses, not a general collision behavior, which is exactly why it's such a frequently tested exam scenario.

Puzzle 3. 🚗 Car crash safety engineers specifically DESIGN vehicles to undergo highly INELASTIC collisions (crumpling extensively) rather than elastic ones (bouncing back cleanly). Why would engineers deliberately choose the collision type that "loses" the most kinetic energy?

In a highly elastic collision, both vehicles would bounce back with substantial velocity, meaning passengers inside experience a very rapid, violent change in velocity (high acceleration) during the brief collision — genuinely dangerous. A highly inelastic, crumpling collision converts most of the kinetic energy into controlled structural deformation (crumple zones absorbing energy as heat and permanent bending) rather than bouncing the car and its occupants back at high speed — this spreads the velocity change over a longer time and distance, reducing the peak force experienced by passengers. Deliberately maximizing energy "loss" (as heat and deformation, not literally destroyed) is precisely the safety strategy modern car design employs.

Puzzle 4. 🏓 A table tennis ball bouncing off a paddle typically has a coefficient of restitution close to (but not exactly) 1, while a ball of wet clay hitting a wall has a coefficient of restitution of essentially 0. What does the coefficient of restitution physically represent, and why can it never exceed 1 for a passive (non-powered) collision?

The coefficient of restitution e directly measures how much of the original relative approach velocity is "recovered" as relative separation velocity after collision — e=1 means full recovery (perfectly elastic), e=0 means zero recovery (the two objects move together afterward, perfectly inelastic). Physically, e can never exceed 1 for an ordinary passive collision because that would require the collision to somehow ADD kinetic energy beyond what was present before impact — violating energy conservation, since no external energy source is involved. Values between 0 and 1 (like a table tennis ball's roughly 0.9) represent partial, realistic energy dissipation, genuinely typical of most real-world collisions.

Puzzle 5. 🌌 Physicists studying subatomic particle collisions in accelerators like the Large Hadron Collider routinely use the exact same momentum and energy conservation principles explored in this simple two-ball collision simulation. What makes these basic conservation laws apply just as rigorously to particles moving near the speed of light as to everyday colliding balls?

Momentum and energy conservation are among the most deeply fundamental principles in all of physics, arising directly from basic symmetries of space and time itself (momentum conservation from the universe's translational symmetry, energy conservation from time-translation symmetry) — they hold true across an extraordinary range of scales and speeds, from everyday colliding balls to subatomic particle collisions. The specific FORMULAS do require modification at relativistic speeds (using relativistic momentum and energy expressions rather than the simple classical ones used in this simulation), but the underlying conservation principles themselves remain absolutely intact — exactly why particle physicists can reconstruct what happened in a collision by carefully applying these same conservation laws to the particles detected afterward.

Problem 1 (NEET level). 📘 A 2kg ball moving at 5 m/s elastically collides head-on with a stationary 3kg ball. Find both final velocities.

v₁f = [(m₁−m₂)v₁]/(m₁+m₂) = [(2−3)(5)]/5 = −1 m/s (bounces back)
v₂f = [2m₁v₁]/(m₁+m₂) = [2(2)(5)]/5 = 4 m/s

Problem 2 (JEE Main level). 📗 Verify momentum and kinetic energy are both conserved for the collision in Problem 1.

Momentum before = (2)(5)+(3)(0) = 10; after = (2)(−1)+(3)(4) = −2+12 = 10 ✓
KE before = ½(2)(5²) = 25 J; after = ½(2)(−1)²+½(3)(4)² = 1+24 = 25 J ✓ — both exactly conserved

Problem 3 (WBJEE level). 📙 The same two masses (2kg at 5m/s, 3kg at rest) instead undergo a perfectly inelastic collision. Find the common final velocity and the fraction of kinetic energy lost.

v_common = (m₁v₁+m₂v₂)/(m₁+m₂) = (2×5+0)/5 = 2 m/s
KE_initial = 25 J; KE_final = ½(5)(2²) = 10 J
Fraction lost = (25−10)/25 = 60% — a substantial fraction converted to heat/deformation

Problem 4 (CBSE Class 11 level). 📕 A ball with coefficient of restitution e=1 (perfectly elastic) hits an identical stationary ball head-on. Predict the outcome using the "equal-mass exchange" rule, and verify using the elastic formulas.

Equal masses (m₁=m₂=m): v₁f = [(m−m)v₁]/(2m) = 0 (stops completely)
v₂f = [2mv₁]/(2m) = v₁ (takes on the full original velocity)
This confirms the "complete exchange" behavior described in the exam tip and Puzzle 2

Problem 5 (JEE Advanced style). 📓 A table tennis ball (coefficient of restitution e=0.9) drops from 1m height onto a rigid, stationary table. Find the rebound height, using the fact that impact/rebound speed ratio equals e for a collision with an immovable object.

Impact speed: v = √(2gh) = √(2×9.8×1) = 4.43 m/s
Rebound speed = e × v = 0.9 × 4.43 = 3.99 m/s
Rebound height = v²/(2g) = (3.99)²/(2×9.8)
Rebound height = 0.81 m (exactly e² = 0.81 times the original height — a useful shortcut: rebound height ratio always equals e²)
🔬
1668

Christiaan Huygens, correcting earlier flawed collision rules proposed by Descartes, derives the correct mathematical treatment of elastic collisions — establishing that both momentum AND kinetic energy are conserved in this special case, a landmark early result in mechanics.

📐
1687

Isaac Newton's laws of motion, particularly the third law (action-reaction), provide the rigorous theoretical foundation explaining WHY momentum is universally conserved in every collision, regardless of elasticity.

🎾
1800s

Physicists formalize the "coefficient of restitution" as a practical, measurable parameter for characterizing real-world collisions between actual materials, bridging the gap between the idealized perfectly-elastic and perfectly-inelastic textbook extremes.

🚗
1950s-1960s

Automotive safety engineers begin systematically applying collision physics to vehicle design, developing the crumple zone concept that deliberately exploits inelastic collision behavior to protect occupants — a direct, life-saving engineering application of these fundamental conservation principles.

⚛️
Present day

The exact same momentum and energy conservation principles explored in this simple two-body simulation remain essential for analyzing particle collisions at facilities like the Large Hadron Collider, where physicists reconstruct high-energy collision events by rigorously applying these same fundamental conservation laws.