Inductors have a reputation for being the "difficult" component in circuit theory, mostly because their behavior runs opposite to intuition in a couple of specific spots. Get those spots straight and an LR circuit turns out to be almost a mirror image of the RC circuit most students already feel comfortable with.

Current rising gradually as the inductor opposes the sudden change

Zero current at the instant of switch-on — really, exactly zero

Close a switch on an LR circuit and current doesn't jump to V₀/R the way it would with a plain resistor. It starts at exactly zero and climbs. The reason is the inductor's self-induced EMF, which opposes any change in the current flowing through it — and at t=0, current is trying to change from nothing to something, which is about as sudden a change as you can ask for. The inductor's opposition at that instant exactly cancels the battery voltage, so nothing flows yet.

This is the exact opposite of how a capacitor behaves at t=0 (where it acts like a short circuit, letting current flow freely). Mixing the two up is probably the single most common error students make moving between these two chapters.

Growth follows the same shape as RC's voltage curve

I(t) = (V₀/R)(1 − e^(−t/τ))   τ = L/R

Swap "current" for "voltage" and this is line-for-line the RC charging equation. At t=τ, current has reached 63.2% of its final value, same number as before, same reason — it's the same underlying exponential math, just with L/R playing the role RC played in the other circuit. Whoever first pointed out this symmetry to me called RC and LR circuits "duals," and the label stuck for good reason: everywhere voltage does something in one circuit, current does the analogous thing in the other.

The dangerous part: what happens at switch-off

Flip the switch open on an inductive circuit — a motor, an electromagnet, a relay coil — and the inductor doesn't just let current politely fade away. It fights the sudden interruption. Since V_L = L(dI/dt), and you're forcing dI/dt to be enormous (current dropping from its steady value to zero in a fraction of a millisecond as contacts separate), the resulting voltage spike can be many times larger than the original supply voltage. That's the spark you sometimes see at a switch controlling something like a large motor or an electromagnet — it's a real, occasionally destructive, phenomenon, not a diagram simplification.

Car ignition systems turn this exact hazard into a feature. A 12V battery is nowhere near enough to jump a spark plug's gap. So the ignition coil deliberately builds up current, then interrupts it abruptly, generating the tens of thousands of volts needed for a proper spark — using precisely the same L(dI/dt) spike that's a nuisance everywhere else.

Why big electromagnets are slow to switch on

Since τ = L/R, and a large industrial electromagnet is deliberately built with a big inductance (many turns, substantial iron core) to maximize field strength, it inevitably ends up with a large time constant too — sometimes taking several seconds to reach full strength after being switched on. This isn't a design flaw; it's an unavoidable side effect of chasing raw magnetic strength. Anything needing fast switching (relays, for instance) is built with deliberately low inductance instead, accepting weaker fields in exchange for quick response.

Try it yourself

LR Circuit: Current Growth & Decay RC Circuit: Charging & Discharging