Home / Mechanics / Vertical Circular Motion

Vertical Circular Motion

NEETJEE
Tension: 0 N v_top(min): 0 m/s —

The physics

An object swinging in a vertical circle needs a minimum speed at the top — below that, gravity alone would provide more centripetal force than needed, and the string (which can only pull, not push) would need to push instead, which it can't. So the object leaves the circular path.

Minimum speed at top: v_top(min) = √(gr)  (tension exactly zero there)
Tension at angle φ from bottom: T = mv²/r + mg cosφ
Speed varies with height (energy conservation): v² = v₀² − 2gr(1−cosφ)

This simulation computes speed at every point from real energy conservation (not a fixed speed), then derives tension from Newton's second law in the radial direction — so the "string goes slack" behavior you see for low speeds is a genuine physical prediction, not scripted.

Exam tip: a very common NEET/JEE question asks for the minimum speed at the bottom to just complete the loop — combine v_top(min)=√(gr) with energy conservation to get v_bottom(min) = √(5gr), a frequently tested result.

Sample data: the minimum speeds for a string-and-ball loop

A ball on a string just barely completes a vertical circle when the tension at the top is zero. The table gives those threshold speeds for three radii.

RadiusMin speed at top √(gr)Min speed at bottom √(5gr)Tension at topTension at bottom
0.5 m2.21 m/s4.95 m/s06 mg
1 m3.13 m/s7.00 m/s06 mg
2 m4.43 m/s9.90 m/s06 mg

Conditions: g = 9.8 m/s², minimum-speed case (tension at top is zero).

Notice: the bottom tension is exactly 6mg at every radius, and the bottom speed is √5 ≈ 2.24 times the top speed. Even for a ball moving faster than the minimum, the bottom tension always exceeds the top tension by exactly 6mg. So a string that is just strong enough to survive the bottom of the loop has to carry six times the ball's weight.

Quick answers

What is the minimum speed at the bottom to complete a vertical circle with a string?
v = √(5gr). At the top the speed must be at least √(gr), where the tension just drops to zero and weight alone provides the centripetal force.
What is the tension at the top and at the bottom?
At the top T = mv²/r − mg. At the bottom T = mv²/r + mg. The tension is largest at the bottom and smallest at the top.
What changes if a rigid rod replaces the string?
A rod can push as well as pull, so the speed at the top can be as low as zero. The minimum speed at the bottom is then √(4gr) = 2√(gr).
Why does speed change in a vertical circle?
Gravity does work as the body goes up and down, so kinetic energy converts to potential energy and back. Energy conservation gives v² = u² − 2gh.

🎯 Practice Zone

Puzzle 1. 🎢 At the very top of a vertical loop, moving at exactly the minimum speed, the string tension is exactly zero — yet the object doesn't fall straight down, it continues along the circular path. Why doesn't zero tension mean the object simply falls?

At the minimum speed condition, gravity ALONE provides exactly the centripetal force needed to keep the object moving in its circular path at that instant (mg=mv²/r) — the string tension genuinely isn't needed at all at that specific point, so it correctly drops to zero. The object isn't "falling" in the sense of leaving the circular path; gravity is doing precisely the job the string was doing everywhere else along the loop, momentarily making the string's tension unnecessary rather than the motion becoming uncontrolled.

Puzzle 2. ⚠️ If a ball on a string moves slower than the minimum required speed at the top of a vertical circle, what actually happens — does the string simply go slack, or does something more dramatic occur?

Below minimum speed, gravity alone would provide MORE centripetal force than needed to maintain that speed on the circular path — but a string can only pull, never push, so it cannot provide "negative" tension to compensate. The string goes slack well before reaching the top, and the ball leaves its circular path early, following a projectile (parabolic) trajectory under gravity alone from that point onward, rather than completing the circle — a genuinely different (and less controlled) type of motion than simply "falling."

Puzzle 3. 🚗 Roller coasters use rigid tracks rather than strings for their loops. Does the "minimum speed" requirement still apply the same way for a rigid track as for a string?

A rigid track fundamentally changes the physics — unlike a string, a track CAN push as well as pull (via the normal force from either the inside or outside rail), so the object doesn't strictly need a minimum speed to stay in contact at the top. In practice though, roller coaster designers still ensure speeds well above this theoretical minimum for genuine safety and comfort — riders need to feel a comfortably positive normal force (not near-weightlessness) throughout the loop, which is why real coaster loops are still designed around similar minimum-speed principles, just with different physical constraints than a simple string-and-ball system.

Puzzle 4. ⚖️ Tension at the bottom of a vertical circular loop is always greater than the object's actual weight — sometimes dramatically so. Why must the string pull harder than just supporting the weight at this specific point?

At the bottom, the string must simultaneously do two jobs: support the object's weight against gravity (as always) AND provide the additional centripetal force needed to curve the object's path into a circle at that point (T−mg=mv²/r, so T=mg+mv²/r). Both requirements point in the same direction (upward, toward the circle's center) at the bottom, so their effects add together, making the bottom the point of maximum tension anywhere in the loop — genuinely more demanding on the string than merely holding the object still.

Puzzle 5. 🌍 Would the minimum speed required to complete a vertical loop of a given radius be different on the Moon compared to Earth?

Yes, significantly less on the Moon — since v_top(min)=√(gr), a smaller gravitational acceleration g directly gives a smaller required minimum speed. On the Moon (g≈1.62 m/s², about 1/6th Earth's), the minimum speed for the same loop radius would be √(1/6)≈0.41 times Earth's value, or roughly 41% of the Earth requirement — a genuinely easier vertical loop to complete under lunar gravity.

Problem 1 (NEET level). 📘 Find the minimum speed at the top of a vertical circular loop of radius 1m to maintain contact.

v_top(min) = √(gr) = √(9.8×1)
v_top(min) = 3.130 m/s

Problem 2 (JEE Main level). 📗 Find the corresponding minimum speed required at the BOTTOM of the same loop to just complete it.

v_bottom(min) = √(5gr) = √(5×9.8×1)
v_bottom(min) = 7.0 m/s

Problem 3 (WBJEE level). 📙 Find the string tension at the bottom of the loop for a 0.5kg mass moving at exactly this minimum bottom speed.

T = mg + mv²/r = (0.5)(9.8) + (0.5)(49)/1
T = 4.9 + 24.5 = 29.4 N (exactly 6× the object's weight of 4.9N)

Problem 4 (CBSE Class 11 level). 📕 Verify, using energy conservation, that the minimum bottom speed (7 m/s) and minimum top speed (3.13 m/s) are mutually consistent for this 1m-radius loop.

Energy conservation (per unit mass): ½v_bottom² = ½v_top² + g(2r)
½(49) = ½(9.8) + (9.8)(2)
24.5 = 4.9 + 19.6 = 24.5 ✓ — confirming both minimum speeds are exactly consistent with each other via energy conservation

Problem 5 (JEE Advanced style). 📓 Find the minimum speed at the top of a vertical loop of the same 1m radius on the Moon (g=1.62 m/s²), and compare to the Earth value.

v_top(min, Moon) = √(g_moon × r) = √(1.62×1)
v_top(min, Moon) = 1.273 m/s
Ratio to Earth: 1.273/3.130 = 0.407 — matching Puzzle 5's prediction of roughly 41% of Earth's required speed
🍎
1687

Isaac Newton's laws of motion and gravitation provide the complete theoretical foundation for analyzing circular motion under gravity — including, in principle, the vertical circle scenario, though roller coasters and looping rides wouldn't exist for another two centuries.

🎢
1846

The first known looping roller coaster, "Centrifugal Railway," opens in Paris — its single loop, built well before rigorous engineering safety calculations were standard, reportedly caused significant discomfort and neck strain to riders due to the extreme forces involved.

📉
Late 1800s

Early circular-loop amusement rides largely fall out of favor due to their harsh, uncomfortable, and sometimes genuinely dangerous forces on riders — a direct consequence of using simple circular loops rather than the carefully shaped, engineered loop profiles used today.

🔄
1970s

Modern roller coasters reintroduce looping elements using carefully engineered "clothoid" (teardrop-shaped, not perfectly circular) loops — this shape keeps centripetal acceleration more comfortable and consistent throughout the loop, directly building on rigorous circular-motion physics like that shown in this simulation.

🚀
Present day

Vertical circular motion analysis remains essential in aerospace engineering (aircraft loop maneuvers, centrifuge training for astronauts) and mechanical engineering (rotating machinery safety), all building on the exact same minimum-speed and tension principles explored here.