How resistors combine depends entirely on whether current has to pass through all of them in sequence (series) or can choose between separate paths (parallel).
Notice that adding resistors in series always increases R_eq (more obstacles in the only path), while adding resistors in parallel always decreases R_eq (more alternative paths for current) — this simulation lets you verify both directly by changing R₃.
The same 10, 20 and 30 Ω resistors are connected in series and then in parallel across 12 V.
| Resistor | Series: voltage across it | Series: power | Parallel: current in it | Parallel: power |
|---|---|---|---|---|
| 10 Ω | 2.00 V | 0.40 W | 1.20 A | 14.4 W |
| 20 Ω | 4.00 V | 0.80 W | 0.60 A | 7.2 W |
| 30 Ω | 6.00 V | 1.20 W | 0.40 A | 4.8 W |
| Total | 12 V (sum) | 2.40 W | 2.20 A | 26.4 W |
Conditions: ideal 12 V source with no internal resistance.
Think About It 1. 🎄 Old-style Christmas fairy lights, wired in series, would all go dark the instant just ONE bulb burned out — a genuinely frustrating design. Why does a single failed bulb break the entire string in a series circuit?
Think About It 2. 🏠 If a single light bulb burns out in your house, only that one specific light goes dark — every other light and appliance in the house keeps working completely normally. Why doesn't this household wiring suffer from the same "one failure breaks everything" problem as old fairy lights?
Think About It 3. 🔋 Adding more resistors in SERIES always increases the total resistance of a circuit, but adding more resistors in PARALLEL always DECREASES the total resistance — seemingly opposite effects from adding more "stuff" to a circuit either way. Why does adding components produce opposite effects depending on how they're connected?
Think About It 4. 🔌 In a parallel circuit, why does the equivalent (combined) resistance always end up SMALLER than even the smallest individual resistor in the group — not just smaller than the average, but smaller than the very smallest one present?
Think About It 5. ⚡ A circuit combines both series and parallel sections together — some resistors wired in series, feeding into a group of others wired in parallel. How would you approach finding the total resistance of such a "mixed" circuit?
Try It 1 (Class 9-10 level). ✏️ Three resistors (4Ω, 6Ω, 10Ω) are connected in series. Find the total resistance.
Try It 2 (Class 10 level). ✏️ The same three resistors (4Ω, 6Ω, 10Ω) are instead connected in parallel. Find the total resistance.
Try It 3 (Class 10 level). ✏️ Two resistors (4Ω and 6Ω) are in series, and this combination is then connected in parallel with a third 10Ω resistor. Find the total resistance.
Try It 4 (Class 9 level). ✏️ In a series circuit with a 12V battery and two equal 6Ω resistors, find the current, and the voltage across each resistor.
Try It 5 (Class 10 level). ✏️ In a parallel circuit with a 12V battery and two 6Ω resistors, find the current through each resistor and the total current from the battery.
Georg Ohm established the fundamental relationship between voltage, current, and resistance — the essential building block that later made it possible to precisely calculate how series and parallel circuit combinations actually behave.
As electric lighting spread into homes, early electrical engineers had to choose between series and parallel wiring for practical lighting systems — parallel wiring won out for permanent household use specifically because it let each individual light be controlled and would keep working independently, exactly the reasoning explored in Puzzle 2.
As electrical grids expanded across cities and countries, engineers developed increasingly sophisticated circuit analysis techniques (building on simple series-parallel combinations) to design and manage large, complex power distribution networks reliably.
Every circuit board inside a smartphone, computer, or appliance contains vast networks of resistors and other components arranged in complex series-parallel combinations — the same basic addition and reciprocal-addition rules explored in this simulation remain the essential starting point for analyzing them.