Home / Optics & Waves / Optical Instruments

Microscope & Telescope Magnification

NEETCBSE
Magnifying power: 0×

The physics

Both instruments use two lenses, but for completely different purposes: a microscope needs to magnify a nearby tiny object, while a telescope needs to make a distant object's small angular size appear larger.

Compound microscope (normal adjustment): M ≈ (L/f₀)(D/f_e)  (D = 25 cm, near point)
Astronomical telescope (normal adjustment): M = f₀/f_e

Notice the telescope's magnification depends only on the ratio of the two focal lengths, while the microscope's also depends on tube length L — which is why microscope objectives are labeled with very short focal lengths (a few mm), while telescope objectives use long focal lengths (metres).

Exam tip: a common NEET/CBSE question asks how to increase telescope magnification — decrease f_e (the eyepiece), not increase f₀, since large objective lenses are expensive and bulky; real telescopes gain magnification mainly through interchangeable eyepieces.

Sample data: magnifying power of a microscope and a telescope

Microscope in normal adjustment: M ≈ (L/f₀)(D/f_e) with D = 25 cm. Telescope in normal adjustment: M = f₀/f_e.

InstrumentLens valuesMagnifying power M
Compound microscopef₀ = 0.5 cm, f_e = 5 cm, L = 16 cm160
Compound microscopef₀ = 0.5 cm, f_e = 2.5 cm, L = 16 cm320
Compound microscopef₀ = 0.5 cm, f_e = 1.25 cm, L = 16 cm640
Astronomical telescopef₀ = 100 cm, f_e = 5 cm20
Astronomical telescopef₀ = 100 cm, f_e = 2.5 cm40
Astronomical telescopef₀ = 100 cm, f_e = 1 cm100

Conditions: assumed lens values; the final image is at infinity for the telescope and at the near point or infinity as stated for the microscope.

Notice: in both instruments a shorter eyepiece focal length gives a higher magnifying power: halving f_e from 2.5 cm to 1.25 cm doubles the microscope magnification, from 320 to 640. A telescope with a 100 cm objective and a 1 cm eyepiece magnifies 100 times, and its tube is 101 cm long.

🎯 Practice Zone

Puzzle 1. 🔭 A telescope's objective lens is typically large and has a long focal length, while its eyepiece is small with a short focal length. Why does maximizing magnification specifically require this particular combination, rather than the reverse?

Telescope magnification is M=f₀/fₑ — a ratio of the objective's focal length to the eyepiece's focal length. To maximize this ratio, you want a LARGE f₀ (long objective focal length) combined with a SMALL fₑ (short eyepiece focal length) — exactly the opposite combination would give minimal, not maximal, magnification. This is precisely why large research telescopes emphasize enormous primary objectives/mirrors (for large f₀, and also for gathering more light), paired with carefully chosen short-focal-length eyepieces for high magnification.

Puzzle 2. 🔬 A microscope's magnification formula includes the tube length L, while a telescope's magnification formula doesn't involve any comparable length parameter. Why does one instrument's design depend on this internal distance while the other doesn't?

A microscope images a very close object (just beyond the objective's focal length), producing a real, magnified intermediate image at a specific distance that depends directly on the tube length. A telescope, by contrast, images an object effectively at infinity — both the objective and eyepiece can be treated with simplified "thin lens at infinity" formulas that conveniently cancel out any dependence on the specific tube length, leaving magnification dependent only on the ratio of focal lengths. This fundamental difference in object distance (very close vs. essentially infinite) is exactly why the two formulas look so structurally different.

Puzzle 3. 👁️ A "relaxed eye" viewing through a magnifying glass or telescope means the final image forms at infinity, requiring no eye-muscle strain to focus. Why is this specific configuration considered the ideal, most comfortable viewing setup, rather than positioning the image closer?

The human eye's lens must actively change shape (accommodate) to focus on objects at different distances, and this muscular effort becomes progressively more tiring the closer the object/image is. When the final image forms at infinity, the eye's lens can relax into its natural, unstrained resting shape (parallel rays require zero accommodation effort) — this is exactly why "normal adjustment" for telescopes and microscopes is specifically defined this way, allowing comfortable extended viewing without eye fatigue.

Puzzle 4. 🌌 Very large modern telescopes use mirrors rather than lenses for their primary objective, while smaller telescopes and microscopes typically use lenses. Why does scale specifically favor mirrors for large instruments?

Large lenses have several serious practical drawbacks at big sizes: they can only be supported around their edges (sagging under their own weight at large diameters, distorting the image), suffer from chromatic aberration (different colors focusing at different points, since light must pass through the glass), and are extremely difficult and expensive to manufacture defect-free at large scale. Mirrors can be supported fully across their entire back surface (much better structural support), have zero chromatic aberration (light simply reflects, doesn't pass through refracting glass), and are considerably easier to manufacture at very large diameters — decisive practical advantages for large research telescopes.

Puzzle 5. 🔍 Increasing a microscope's magnification indefinitely (using ever-shorter focal length lenses) doesn't actually let you see finer and finer details without limit. What fundamental physical principle eventually limits how much useful detail any microscope can reveal, regardless of magnification power?

Diffraction — the same wave phenomenon responsible for a single slit's spreading pattern — fundamentally limits any optical instrument's resolving power based on the wavelength of light used and the lens aperture size, regardless of how much the image is subsequently magnified. Beyond this diffraction-imposed resolution limit, further magnification just produces a larger but increasingly blurry image ("empty magnification") rather than revealing genuinely new detail — this is precisely why electron microscopes, using much shorter-wavelength electron matter-waves (as covered in the de Broglie and Davisson-Germer simulations), can resolve far finer detail than any visible-light microscope ever could.

Problem 1 (NEET level). 📘 Find the magnification of a simple magnifying glass with focal length 5cm, when the final image is formed at the near point (D=25cm).

M = 1 + D/f = 1 + 25/5
M = 6

Problem 2 (JEE Main level). 📗 Find the magnification of the same magnifying glass when used with a relaxed eye (image at infinity).

M = D/f = 25/5
M = 5 — slightly less than the near-point case, but more comfortable for extended viewing (per Puzzle 3)

Problem 3 (WBJEE level). 📙 An astronomical telescope has an objective focal length of 100cm and eyepiece focal length of 2cm. Find its magnification and total length (normal adjustment).

M = f₀/fₑ = 100/2 = 50
Length = f₀ + fₑ = 100 + 2 = 102 cm

Problem 4 (CBSE Class 12 level). 📕 Using the same telescope, find the new magnification if the eyepiece is swapped for one with fₑ=1cm instead.

M_new = f₀/fₑ_new = 100/1
M_new = 100 — exactly double the magnification, confirming the exam tip: swapping to a shorter-focal-length eyepiece is the practical way to boost magnification

Problem 5 (JEE Advanced style). 📓 A compound microscope has objective image distance vₒ=10cm, object distance uₒ=1.1cm, near point D=25cm, and eyepiece focal length fₑ=5cm. Find the total magnification.

Objective magnification: Mₒ = vₒ/uₒ = 10/1.1 = 9.09
Eyepiece magnification: Mₑ = 1 + D/fₑ = 1 + 25/5 = 6
Total: M = Mₒ × Mₑ = 9.09 × 6
M = 54.5 (total magnification is always the product of the two individual lens contributions)
🔍
1590s

Dutch spectacle-makers, likely including Hans and Zacharias Janssen, are among the first to combine multiple lenses to build a working compound microscope, though precise credit and dates remain historically disputed.

🔭
1608

Hans Lippershey is generally credited with the first practical refracting telescope patent application, sparking rapid interest and independent replication across Europe within months.

🌌
1609

Galileo Galilei, hearing of the Dutch telescope, builds his own improved version and turns it toward the sky — discovering Jupiter's moons, mountains on Earth's Moon, and phases of Venus, among the most consequential applications of any optical instrument in history.

🪞
1668

Isaac Newton builds the first practical reflecting telescope, using a curved mirror instead of a lens as the primary objective — directly avoiding the chromatic aberration problems that plagued refracting telescopes of the era, and establishing the design principle that dominates large modern telescopes today.

🔬
1670s

Antonie van Leeuwenhoek, using expertly hand-ground single-lens microscopes of his own design, becomes the first person to observe bacteria and other microorganisms — pioneering microbiology through remarkably careful optical craftsmanship rather than complex multi-lens systems.