Home / Electricity & Magnetism / Faraday's Induction

Faraday's Law of Induction

NEETCBSE
Flux Φ: 0 EMF: 0 V Induced current: —

The physics

Moving a magnet through a coil changes the magnetic flux linked with it, and this changing flux induces an EMF — the faster the change, the larger the EMF. The induced current always flows in the direction that opposes the change causing it (Lenz's law), which is really just a statement of energy conservation.

Faraday's law: ε = −N dΦ/dt
Flux: Φ = ∫B·dA  (here modeled as a smooth bell-shaped profile as the magnet passes through, representative of a real dipole field's flux through a coil — not an exact closed-form solenoid calculation)

Notice the EMF is exactly zero both when the magnet is far away (no flux to change) and right at the point of maximum flux (flux is momentarily not changing, even though it's large) — EMF depends on the rate of change of flux, not flux itself.

Exam tip: a frequent NEET question asks what happens if you move the magnet twice as fast — EMF doubles (it's proportional to velocity), but total charge induced (q = NΔΦ/R) stays the same, since it depends only on the total flux change, not how fast it happened.

Sample data: EMF induced for different speeds of the magnet

ε = N ΔΦ/Δt (average value). The same change in flux is produced in different times.

Time taken ΔtFlux change ΔΦAverage EMF
0.5 s5 mWb2 V
0.1 s5 mWb10 V
0.02 s5 mWb50 V

Conditions: coil of 200 turns, flux change 5 mWb.

Notice: the flux change is the same in each row, but pushing the magnet 25 times faster (0.5 s to 0.02 s) gives 25 times the EMF (2 V to 50 V). The faster the change, the larger the EMF, and the sign of ε flips when the magnet leaves, which is Lenz's law.

Quick answers

What is Faraday's law of electromagnetic induction?
The induced EMF in a coil equals the negative rate of change of magnetic flux linked with it: ε = −N dΦ/dt. The negative sign is Lenz's law.
What is Lenz's law?
The direction of the induced current is such that it opposes the change in flux that produced it. This follows from conservation of energy: if it helped the change, energy would be created from nothing.
What is the formula and unit of magnetic flux?
Φ = BA cos θ, where θ is the angle between the field and the normal to the area. The SI unit is the weber (Wb), with 1 Wb = 1 T·m².
How can the induced EMF be increased?
Move the magnet faster, use a stronger magnet, or add more turns to the coil. All three increase dΦ/dt or N in ε = −N dΦ/dt.

🎯 Practice Zone

Puzzle 1. 🧲 A magnet is held perfectly still inside a coil of wire — a huge amount of magnetic flux passes through the coil. Is any EMF induced?

No — zero EMF, no matter how strong the flux is. Faraday's law depends entirely on the rate of change of flux (dΦ/dt), not the flux itself. A stationary magnet inside a coil produces constant, unchanging flux, so dΦ/dt=0 and no EMF is induced, regardless of how strong the magnet is.

Puzzle 2. 🔄 Lenz's law says induced current always opposes the change causing it. Why must this be true — what would go wrong physically if it worked the other way?

If induced current instead assisted the change causing it, you'd get a runaway feedback loop — more flux change would create more current, which would create more flux change, without limit, generating unlimited energy from nothing. This would violate conservation of energy. Lenz's law (opposing the change) is really just conservation of energy expressed in electromagnetic terms — you always have to do work against the induced effect to keep the change going.

Puzzle 3. 🚴 Why does pedaling a bicycle dynamo (which lights a lamp) feel noticeably harder than pedaling with the lamp disconnected?

This is Lenz's law in action — as you spin the dynamo's coil, it induces a current, and that induced current creates its own magnetic field that opposes your spinning motion. You genuinely have to do extra mechanical work to overcome this opposition, and that extra work is exactly what becomes the electrical energy lighting the lamp. With the lamp disconnected, no current flows, so there's no opposing force, and pedaling feels easier.

Puzzle 4. 🥫 A solid metal ring and a ring with a small gap cut into it are both dropped through a magnetic field. Which one falls faster?

The gapped ring falls faster (closer to free-fall speed). The solid ring forms a complete conducting loop, so changing flux can drive an induced current around it, which (by Lenz's law) creates an opposing force that slows the fall — this is the basis of eddy-current braking. The gapped ring can't complete a circuit, so no current flows, no opposing force exists, and it falls as if there were no magnetic field at all.

Puzzle 5. ⚡ Why do induction stovetops heat pots directly (with the stovetop itself staying relatively cool) rather than heating a coil that then transfers heat to the pot?

An induction stovetop creates a rapidly alternating magnetic field beneath the pot, which induces eddy currents directly inside the pot's own conductive metal base. These induced currents meet the pot's own electrical resistance, generating heat (I²R losses) directly inside the pot itself — the stovetop surface never needs to get hot at all, making induction cooking both faster and safer than a traditional resistive hotplate.

Problem 1 (NEET level). 📘 A coil of 100 turns experiences a flux change from 0.01 Wb to 0.05 Wb in 0.2 seconds. Find the induced EMF.

EMF = N(ΔΦ/Δt) = 100 × (0.05−0.01)/0.2 = 100 × 0.2
EMF = 20 V

Problem 2 (JEE Main level). 📗 A metal rod of length 1 m moves at 2 m/s perpendicular to a 0.5 T magnetic field. Find the motional EMF induced across its ends.

EMF = BLv = 0.5 × 1 × 2 = 1 V

Problem 3 (WBJEE level). 📙 A circular loop of radius 10 cm sits in a magnetic field increasing at 2 T/s. Find the induced EMF.

EMF = A(dB/dt) = π(0.1)² × 2 = π × 0.01 × 2
EMF = 0.0628 V (62.8 mV)

Problem 4 (CBSE Class 12 level). 📕 The EMF from Problem 3 drives current through a 5 Ω resistor connected to the loop. Find the induced current.

I = EMF/R = 0.0628/5 = 0.01256 A (12.56 mA)

Problem 5 (JEE Advanced style). 📓 A coil with self-inductance 0.5 H carries a current changing at 10 A/s. Find the self-induced back-EMF, and explain its physical significance.

EMF = L(dI/dt) = 0.5 × 10 = 5 V
This "back-EMF" opposes the change in current (Lenz's law applied to the coil's own changing field) — it's exactly why inductors resist sudden current changes, a property exploited in everything from motor start-up circuits to switch-mode power supplies.
🧭
1820

Hans Christian Ørsted discovers, in a lecture demonstration, that electric current deflects a nearby compass needle — the first hint that electricity and magnetism are deeply connected, sparking intense investigation across Europe.

🔁
1831

Michael Faraday, after years of experimentation, discovers that a changing magnetic field (not a steady one) induces electric current in a nearby coil — electromagnetic induction, one of the single most consequential discoveries in the history of technology.

🇺🇸
1831

Joseph Henry, working independently in America at almost exactly the same time, also discovers electromagnetic induction — but Faraday publishes first and is generally credited primarily, though Henry's contributions (especially to self-inductance) are commemorated in the SI unit of inductance, the henry.

➖
1834

Heinrich Lenz formulates the law determining the direction of induced current — always opposing the change that produced it — completing the qualitative picture alongside Faraday's magnitude law.

📐
1860s

James Clerk Maxwell unifies Faraday's induction law with the rest of electromagnetism into his famous four equations — Faraday's experimental discovery becomes one pillar of the complete classical theory of electricity, magnetism, and light.