Home / Electricity & Magnetism / Biot-Savart Law

Biot-Savart Law: Magnetic Field of a Current

JEEWBJEE
B (numeric integration): 0 µT B (closed-form): 0 µT

The physics

Biot-Savart's law gives the magnetic field contribution from an infinitesimal current element — the total field from any wire shape is the sum (integral) of all these tiny contributions.

dB = (μ₀/4π) · I dl × r̂ / r²
Infinite straight wire: B = μ₀I / (2πr)   Circular loop center: B = μ₀I / (2R)
μ₀ = 4π × 10⁻⁷ T·m/A

Switch to the straight wire and increase its length — watch the numeric integration approach the infinite-wire formula μ₀I/(2πr) as the wire gets much longer than the distance r, which is exactly the limit in which the finite-wire result reduces to the simpler infinite-wire one.

Exam tip: a common JEE/WBJEE question compares field at the center of a loop to the field from the same wire straightened out at the same distance — the loop's field is always stronger, since every element of the loop is roughly equidistant from the center, while a straight wire's far elements contribute much less.

Sample data: field around a long straight wire

For a long straight wire B = μ₀I/(2πr). Doubling the current doubles B; doubling the distance halves it.

CurrentDistance from wireField B
1 A1 cm20.0 μT
1 A5 cm4.0 μT
1 A10 cm2.0 μT
5 A1 cm100.0 μT
5 A5 cm20.0 μT
5 A10 cm10.0 μT
10 A1 cm200.0 μT
10 A5 cm40.0 μT
10 A10 cm20.0 μT

Conditions: μ₀ = 4π×10⁻⁷ T m/A, infinitely long straight wire in air.

Notice: 10 A at 5 cm gives 40 μT, almost the same as the strength of the Earth's magnetic field in India (a few tens of μT). A compass placed 5 cm from a wire carrying 10 A is therefore pulled about as hard by the wire as by the Earth.

Quick answers

What is the Biot-Savart law?
The magnetic field due to a current element is dB = (μ₀/4π) I dl sin θ / r². The constant μ₀/4π = 10⁻⁷ T·m/A.
What is the field at the centre of a circular loop?
B = μ₀I/2R for one turn, and B = μ₀NI/2R for N turns.
What is the field of a long straight wire?
B = μ₀I/2πr, which falls as 1/r, and the lines are circles around the wire (direction by the right-hand thumb rule).
What is Ampere's circuital law?
∮B·dl = μ₀I_enc. The line integral of B around any closed loop equals μ₀ times the current passing through the loop. It is the easiest way to find the field when there is symmetry.

Read the full guide: Biot-Savart law and Ampere's law simplified

🎯 Practice Zone

Puzzle 1. 🌀 The Biot-Savart law gives the magnetic field contribution from an infinitesimally small current element — but a truly isolated current element (a tiny piece of wire with current flowing in and nowhere for it to go) can't actually exist on its own. Why do we still use this law?

The Biot-Savart law is fundamentally a mathematical building block, not a description of a standalone physical object — you're meant to integrate (sum) contributions from every small element around a complete, physically real closed circuit. Just as you can conceptually break a continuous curve into infinitesimal straight segments for calculus purposes without any single segment existing independently, each dl in Biot-Savart is a bookkeeping device for the integration, not a claim that current elements exist in isolation.

Puzzle 2. 🧲 Why does a circular current loop produce a stronger magnetic field at its center than the same length of wire would if straightened out and placed at the same distance from the observation point?

In a circular loop, every single point along the wire is exactly the same distance (the radius) from the center — every infinitesimal current element contributes constructively and equally to the field there. In a straight wire, only the closest points contribute strongly; points farther along the wire are much farther from the observation point and contribute progressively less (falling off with distance). This "equidistant advantage" of the loop geometry is precisely why loops concentrate field more efficiently than straight wires of the same length.

Puzzle 3. 📏 Why does the magnetic field from an infinite straight wire fall off as 1/r (inverse distance), while the field from a point charge falls off as 1/r² (inverse square)?

This difference comes from the different geometries of the two sources. A point charge is truly localized at one point, so its field spreads out over an expanding SPHERE (surface area ∝r²) as distance increases, diluting field strength as 1/r². An infinite wire is a genuinely one-dimensional, infinitely extended source — its field spreads out over an expanding CYLINDER (circumference ∝r, not r²) around the wire, diluting field strength more gently, as only 1/r. The different fall-off rates directly reflect the different dimensionalities of the two source geometries.

Puzzle 4. ➡️⬅️ Two parallel wires carrying current in the SAME direction attract each other, while two wires carrying current in OPPOSITE directions repel. Does this match or contradict your intuition from electric charges (like charges repel, unlike attract)?

It's genuinely the opposite pattern from electric charges, which is a frequent source of confusion. The magnetic force arises because each wire's current creates a magnetic field at the other wire's location, and the Lorentz force (F=IL×B) on a current-carrying wire in that field depends on the specific right-hand-rule geometry — same-direction currents happen to produce mutually attractive forces, while opposite-direction currents produce repulsive ones. This isn't analogous to charge-charge interaction at all; it's a fundamentally different (though related) type of electromagnetic interaction, current-current rather than charge-charge.

Puzzle 5. 🌐 On the axis of a circular current loop, far away from the loop (distance x much greater than radius R), the field falls off approximately as 1/x³ — a much steeper fall-off than the 1/r or 1/r² seen for wires and point charges. Why does the loop's far-field die out so much faster?

A current loop, viewed from far away, behaves like a magnetic dipole (analogous to a tiny bar magnet) rather than a simple monopole-like source. Dipole fields inherently fall off faster (as 1/x³) than monopole-like fields (1/x² for point charge, 1/x for infinite wire) because a dipole's field partially cancels itself at a distance — the "positive" and "negative" magnetic pole-like contributions from opposite sides of the loop mostly cancel when viewed from far away, leaving only a weaker residual field that dies off more steeply with distance.

Problem 1 (NEET level). 📘 Find the magnetic field at the center of a circular loop of radius 0.1m carrying 5A of current.

B = μ₀I/(2R) = (4π×10⁻⁷)(5)/(2×0.1)
B = 31.42 μT

Problem 2 (JEE Main level). 📗 Find the magnetic field at perpendicular distance 0.1m from an infinitely long straight wire carrying 5A.

B = μ₀I/(2πa) = (4π×10⁻⁷)(5)/(2π×0.1)
B = 10.0 μT (notably weaker than the loop's center field from Problem 1, for the same current, confirming the exam tip above)

Problem 3 (WBJEE level). 📙 Find the magnetic field on the axis of the same loop (R=0.1m, I=5A) at a distance x=0.1m from its center.

B = μ₀IR²/[2(R²+x²)^1.5] = (4π×10⁻⁷)(5)(0.1)²/[2(0.01+0.01)^1.5]
B = 11.11 μT (weaker than the center value of 31.42 μT, as expected moving away along the axis)

Problem 4 (CBSE Class 12 level). 📕 Find the force per unit length between two long parallel wires, each carrying 5A, separated by 0.1m.

F/L = μ₀I₁I₂/(2πd) = (4π×10⁻⁷)(5)(5)/(2π×0.1)
F/L = 50 μN/m (this exact setup, incidentally, is how the SI ampere was historically defined before 2019)

Problem 5 (JEE Advanced style). 📓 Verify that the axial field formula from Problem 3 correctly reduces to the center-field formula from Problem 1 when x=0.

Setting x=0 in B=μ₀IR²/[2(R²+x²)^1.5]:
B = μ₀IR²/[2(R²)^1.5] = μ₀IR²/(2R³) = μ₀I/(2R)
This is exactly the center-field formula from Problem 1 — confirming the general axial formula correctly contains the center-point result as its x=0 special case.
🧭
1820

Hans Christian Ørsted's accidental discovery that current deflects a compass needle sparks an explosion of research into the connection between electricity and magnetism across Europe.

🔬
1820

Jean-Baptiste Biot and Félix Savart, within weeks of hearing about Ørsted's discovery, conduct careful quantitative experiments measuring exactly how the magnetic force from a current-carrying wire varies with distance, establishing the mathematical law that now bears their names.

🧮
1820s

André-Marie Ampère develops a more general and mathematically rigorous theory of electrodynamics around the same period, providing an alternative, more powerful integral formulation (Ampère's law) that complements the Biot-Savart approach.

📐
1860s

James Clerk Maxwell incorporates and formalizes these results within his unified equations of electromagnetism, showing Biot-Savart's empirically-derived law is fully consistent with (and derivable from) the deeper, more general Maxwell equations.

⚙️
Present day

The Biot-Savart law remains a standard, essential computational tool in electrical engineering, MRI machine design (calculating precise magnetic fields from complex coil geometries), and physics research — a direct, still-central legacy of those first frantic weeks of experimentation following Ørsted's 1820 discovery.