Home / Mechanics / Ballistic Pendulum

Ballistic Pendulum

NEETJEE
Bullet speed: 0 m/s Rise height: 0 cm Energy lost: 0%

The physics

A bullet fired into a hanging wooden block embeds itself (a perfectly inelastic collision), and the combined bullet+block swings upward. By measuring how high it swings, you can work backward to find the bullet's original speed — without ever directly timing the bullet itself.

Stage 1 — collision (momentum conserved): mv = (m+M)V
Stage 2 — swing (energy conserved): ½(m+M)V² = (m+M)gh  →  V = √(2gh)
Combined: v = [(m+M)/m]√(2gh)

This simulation genuinely applies momentum conservation for the collision (computing the actual velocity loss) and then energy conservation for the swing (computing the actual rise height) as two separate, real physical steps — not a single shortcut formula — so you can watch exactly where the "missing" kinetic energy goes.

Exam tip: a very common NEET/JEE trap is applying energy conservation across the entire process (bullet embedding included) — this is wrong, since the collision itself is inelastic and loses energy (usually as heat and deformation). Only apply energy conservation to the swing stage, after the collision is already complete.

Sample data: bullet speed from the height of the swing

After the bullet embeds in the block, the pair swings up to height h. V = √(2gh) and the bullet speed is v = [(m+M)/m]√(2gh).

Rise height hSpeed just after impact VBullet speed v
2 cm0.626 m/s125.2 m/s
5 cm0.990 m/s198.0 m/s
10 cm1.400 m/s280.0 m/s
20 cm1.980 m/s396.0 m/s

Conditions: bullet mass 10 g, block mass 1.99 kg (total 2.00 kg), g = 9.8 m/s².

Notice: a rise of just 10 cm means a 280 m/s bullet, so a small swing measures a very fast bullet. Only 0.5% of the bullet's kinetic energy ends up in the swing; the rest is lost in the collision, because momentum is conserved in the collision, not kinetic energy.

🎯 Practice Zone

Puzzle 1. 🔥 Roughly 99.5% of the bullet's kinetic energy vanishes in the collision — yet we can still find the bullet's exact original speed. How can we recover accurate information from a process that destroys most of the energy?

Momentum conservation and energy conservation are two completely independent physical laws — losing most of the kinetic energy (as heat, sound, and deformation) doesn't affect momentum conservation at all, since momentum is conserved in literally every collision, elastic or not. We recover the bullet's speed entirely from the momentum-conservation step (before energy is lost) combined with the swing height (which reflects only the energy remaining after the collision) — we never need the "lost" energy at all.

Puzzle 2. ⚖️ If the block were replaced with one twice as heavy (same bullet, same bullet speed), would the pendulum swing higher or lower?

Lower — significantly so, in fact. A heavier block means the same bullet momentum gets "diluted" across more mass, producing a smaller combined velocity V=mv/(m+M). Since rise height depends on V² (h=V²/2g), doubling the block mass reduces the swing height by roughly a factor of 4, not just 2 — a clearly non-linear, easy-to-underestimate effect.

Puzzle 3. 🎯 Why must the bullet actually embed itself in the block (a perfectly inelastic collision) for this method to work — what would go wrong if the bullet bounced back elastically instead?

The simple formula v=[(m+M)/m]√(2gh) specifically assumes the bullet and block move together with one shared final velocity V after the collision — the defining feature of a perfectly inelastic collision. If the bullet instead bounced back with its own separate velocity, you'd need to measure the block's swing AND the bullet's rebound speed separately, and the momentum equation would need an extra unknown — the elegant single-measurement method breaks down entirely.

Puzzle 4. 🌡️ Where does the "lost" 99.5% of kinetic energy actually go, physically?

It converts into heat (from friction and plastic deformation as the bullet punches into and compresses the block material), sound (the impact noise), and permanent structural deformation of both the bullet and the block material at the microscopic level. None of this energy is truly "destroyed" — total energy (including heat) is still conserved — it's just no longer available as macroscopic kinetic energy of the combined bullet+block system.

Puzzle 5. 🏹 Would this exact same method (momentum conservation, then energy conservation) work equally well for a very slow-moving heavy object embedding in a lighter block, not just a fast bullet?

Yes — the underlying physics (perfectly inelastic collision followed by energy-conserving swing) doesn't care about the specific speed or which object is heavier; the same two-stage conservation-law method applies to any inelastic-collision-then-swing scenario. The "bullet and block" framing is just the classic historical example — the same mathematics works for any similar setup, such as a swinging door being struck by any object that sticks to it.

Problem 1 (NEET level). 📘 An 8g bullet embeds in a 2kg block at 200 m/s. Find the rise height of the combined system.

V = mv/(m+M) = (0.008×200)/(0.008+2) = 0.797 m/s
h = V²/(2g) = 0.797²/19.6 = 3.24 cm

Problem 2 (JEE Main level). 📗 A 10g bullet embeds in a 3kg block, causing a measured rise of 10 cm. Find the bullet's original speed.

v = [(m+M)/m]√(2gh) = (3.01/0.01)×√(2×9.8×0.10)
v = 421.4 m/s

Problem 3 (WBJEE level). 📙 For a 5g bullet at 150 m/s embedding in a 2kg block, find the percentage of kinetic energy lost in the collision.

V = (0.005×150)/(2.005) = 0.374 m/s
KE_before = 0.5×0.005×150² = 56.25 J
KE_after = 0.5×2.005×0.374² = 0.140 J
Energy lost = 99.75% — even more extreme than Problem 1 due to the smaller bullet-to-block mass ratio

Problem 4 (CBSE Class 11 level). 📕 Using the setup from Problem 1 (8g bullet, 200 m/s), find the combined velocity immediately after the block mass is doubled to 4kg (same bullet and speed), and compare rise heights.

V(M=2kg) = 0.797 m/s → h = 3.24 cm (from Problem 1)
V(M=4kg) = (0.008×200)/(4.008) = 0.399 m/s → h = 0.399²/19.6 = 0.81 cm
Doubling the block mass reduces the rise height to about 1/4 — confirming Puzzle 2's prediction exactly.

Problem 5 (JEE Advanced style). 📓 A 6g bullet embeds in a 1.5kg block at 180 m/s. Find the combined post-collision velocity, then verify energy conservation holds correctly for the subsequent swing stage only (not the collision stage).

V = (0.006×180)/(1.506) = 0.717 m/s (momentum-conserved collision result)
Swing stage: ½(m+M)V² = (m+M)gh
h = V²/(2g) = 0.717²/19.6 = 2.62 cm
This height calculation correctly uses ONLY the post-collision KE (½(m+M)V²=0.387 J) — not the original bullet KE (97.2 J) — confirming energy conservation applies only from this point forward, exactly as the exam tip above warns.
🎯
1742

Benjamin Robins, a British mathematician and military engineer, invents the ballistic pendulum — the first scientifically rigorous method to accurately measure a projectile's velocity, at a time when firearm muzzle velocities were essentially unmeasurable by any direct method.

📖
1742

Robins publishes New Principles of Gunnery, describing the device and its underlying physics — this work fundamentally transformed artillery science from guesswork into a quantitative, measurable discipline.

🇩🇪
1750s

Leonhard Euler translates and extensively annotates Robins' work into German, adding substantial mathematical refinement — the ballistic pendulum becomes standard equipment across European military and scientific institutions.

🔫
18th–19th century

The ballistic pendulum remains the standard, most accurate method for measuring bullet and artillery shell velocities for well over a century, playing a significant role in the systematic scientific development of firearms and ammunition.

⏱️
Early 20th century

Electronic chronographs (using light gates or induction coils to directly time a bullet's flight) gradually replace the ballistic pendulum for practical velocity measurement — though the ballistic pendulum survives today primarily as a classic teaching demonstration of combined momentum and energy conservation.