Home / Mechanics / Atwood Machine

Atwood Machine

JEEWBJEE
Acceleration: 0 m/s² Tension: 0 N

The physics

Two masses hang from a light string over a frictionless pulley. The heavier side falls, the lighter side rises, both linked by the same string tension and the same acceleration magnitude.

Acceleration: a = (m₁ − m₂)g / (m₁ + m₂)
Tension: T = 2m₁m₂g / (m₁ + m₂)

This simulation solves Newton's second law for each mass independently (m₁g − T = m₁a and T − m₂g = m₂a) and confirms both give the exact same a and T as the combined formulas above — verified to match precisely for any masses you choose.

Exam tip: a common JEE/WBJEE trap asks for tension when m₁ = m₂ — students often guess zero since nothing accelerates, but T actually equals m₁g (the full weight), since the string must still support each mass against gravity.

Sample data: what happens as one mass gets heavier

The lighter mass is fixed at 1 kg and the other one is made heavier step by step. a = (m₁−m₂)g/(m₁+m₂), T = 2m₁m₂g/(m₁+m₂).

m₁m₂AccelerationTensionT ÷ m₂g
1 kg1 kg0.00 m/s²9.80 N1.00
1.2 kg1 kg0.89 m/s²10.69 N1.09
1.5 kg1 kg1.96 m/s²11.76 N1.20
2 kg1 kg3.27 m/s²13.07 N1.33
3 kg1 kg4.90 m/s²14.70 N1.50
10 kg1 kg8.02 m/s²17.82 N1.82
100 kg1 kg9.61 m/s²19.41 N1.98

Conditions: g = 9.8 m/s², massless string and frictionless pulley.

Notice: even with a 100 kg mass on one side the acceleration never reaches g (9.8 m/s²) and the tension never reaches 2m₂g = 19.6 N. They only approach those limits. Also, the tension is always between m₂g and 2m₂g when m₁ ≥ m₂, so the string carries more than the lighter weight but less than the heavier one.

🎯 Practice Zone

Puzzle 1. ⚖️ With equal masses on both sides, the Atwood machine doesn't accelerate at all — yet the string tension isn't zero. Why must the string still pull with significant force even though nothing is moving?

Zero acceleration means the NET force on each mass is zero, not that all forces are zero — for each hanging mass, the string tension must still exactly balance that mass's own weight (T=mg) to keep it from falling, even in this balanced, non-accelerating configuration. This is exactly analogous to a book resting motionless on a table: the table's normal force isn't zero just because the book isn't accelerating — it's precisely equal to gravity, keeping net force at zero.

Puzzle 2. 🎈 The tension in an Atwood machine's string is ALWAYS somewhere between the two individual weights (m₁g and m₂g), never equal to either one exactly (except in the special equal-mass case). Why does tension always land in this middle range?

If tension equaled the heavier mass's full weight, that mass would experience zero net force and wouldn't accelerate at all — but it clearly does (it's being pulled up by the lighter side descending). If tension equaled the lighter mass's full weight, similarly, that mass wouldn't accelerate either. The actual physical tension must be large enough to noticeably decelerate the falling heavier mass (partially supporting its weight) while simultaneously being large enough to accelerate the rising lighter mass upward past its own weight — this dual requirement mathematically forces T to land strictly between m₁g and m₂g.

Puzzle 3. 🔵 Real pulleys have mass and their own moment of inertia, unlike the idealized "massless, frictionless pulley" typically assumed in introductory Atwood machine problems. How does accounting for a real pulley's mass change the resulting acceleration?

A massive pulley must itself be angularly accelerated (given rotational kinetic energy) as the string moves over it — this requires additional torque, which comes at the expense of the linear acceleration available to the two hanging masses. The pulley's rotational inertia effectively adds an "extra effective mass" (I/R² for a disk-shaped pulley) to the denominator of the acceleration formula, always REDUCING the resulting acceleration compared to the idealized massless-pulley case — a heavier pulley makes the whole system respond more sluggishly.

Puzzle 4. 🌍 If an entire Atwood machine setup (masses, pulley, string) were transported to the Moon, would the acceleration of the system be affected, and if so, how?

Yes — the acceleration formula a=(m₁−m₂)g/(m₁+m₂) has g appearing as a simple overall multiplying factor. On the Moon (g≈1.62 m/s², about 1/6th Earth's), the resulting acceleration would be exactly 1/6th of the Earth value, for the identical masses. Interestingly, the string TENSION would also decrease proportionally (since T depends on both g and m·a, and a itself scales with g) — everything about the system's dynamics scales down together, though the relative RATIO between the two masses' motion stays exactly the same.

Puzzle 5. 🔬 The original historical purpose of the Atwood machine (invented in 1784) wasn't studying pulleys or tension at all — it was designed to solve a completely different measurement problem. What was George Atwood originally trying to achieve with this device?

Atwood designed this machine specifically to experimentally verify Newton's laws of motion by measuring the acceleration due to gravity precisely — a genuinely difficult task with free-falling objects in the 1780s, since free-fall happens far too quickly for the crude timing instruments of that era to measure accurately. By using two nearly-balanced masses (making acceleration deliberately small and controllable, rather than the full g), Atwood could slow the motion down to a measurable, observable speed — a clever, foundational experimental technique that made precise verification of Newtonian mechanics practically achievable for the first time.

Problem 1 (NEET level). 📘 Find the acceleration of an Atwood machine with m₁=5kg and m₂=3kg.

a = (m₁−m₂)g/(m₁+m₂) = (5−3)(9.8)/(5+3)
a = 2.45 m/s²

Problem 2 (JEE Main level). 📗 Find the string tension for the same system.

T = 2m₁m₂g/(m₁+m₂) = 2(5)(3)(9.8)/8
T = 36.75 N (notice: less than m₁g=49N but more than m₂g=29.4N, confirming Puzzle 2)

Problem 3 (WBJEE level). 📙 Verify Newton's second law independently for each mass, using the a and T found in Problems 1-2.

For m₁ (descending): m₁g − T = m₁a → 49 − 36.75 = 12.25 N, and m₁a = (5)(2.45) = 12.25 N ✓
For m₂ (ascending): T − m₂g = m₂a → 36.75 − 29.4 = 7.35 N, and m₂a = (3)(2.45) = 7.35 N ✓
Both check out exactly — confirming the combined formulas are consistent with independent Newton's second law analysis for each mass

Problem 4 (CBSE Class 11 level). 📕 Find the acceleration for an Atwood machine with equal masses m₁=m₂=4kg, and separately find the tension.

a = (4−4)(9.8)/8 = 0 m/s² (as expected, no acceleration)
T = 2(4)(4)(9.8)/8 = 39.2 N = m₁g = m₂g exactly — confirming the exam tip's point that tension is NOT zero despite zero acceleration

Problem 5 (JEE Advanced style). 📓 A real (non-ideal) 2kg disk-shaped pulley (radius 0.1m) is used with the same m₁=5kg, m₂=3kg masses. Find the new acceleration, accounting for the pulley's rotational inertia.

Effective added mass from pulley: I/R² = (½MR²)/R² = M/2 = 2/2 = 1 kg
a = (m₁−m₂)g/(m₁+m₂+M/2) = (2)(9.8)/(5+3+1)
a = 2.178 m/s² — noticeably reduced from the massless-pulley value of 2.45 m/s² (Problem 1), directly confirming Puzzle 3's prediction that a massive pulley slows the system down
🎓
1784

George Atwood, a fellow of Trinity College, Cambridge, invents this machine specifically to provide experimental verification of Newton's laws of motion, and to measure the acceleration due to gravity more precisely than existing free-fall methods allowed.

📖
1784

Atwood describes the device in detail in his book A Treatise on the Rectilinear Motion and Rotation of Bodies, presenting it as a genuine scientific instrument for controlled, precise experimentation — not merely a teaching demonstration, which is how it's primarily used today.

🔬
Late 1700s–1800s

The Atwood machine becomes a standard piece of scientific apparatus in physics laboratories across Europe, valued specifically for its ability to slow down and make measurable a phenomenon (gravitational acceleration) that's otherwise far too fast to observe precisely with era-appropriate instruments.

🎓
19th–20th century

As physics education becomes standardized in universities worldwide, the Atwood machine transitions from a cutting-edge research instrument into one of the most widely used teaching demonstrations for Newton's second law, tension analysis, and (with a massive pulley) rotational dynamics.

💻
Present day

While no longer used for precision gravity measurement (modern methods are far more accurate), the Atwood machine remains a cornerstone of introductory mechanics education worldwide, exactly as it appears in this simulation — a testament to how well-designed a simple 18th-century experimental apparatus can be.