Projectile motion problems all look different on the surface — a ball thrown from a cliff, a shell fired at an angle, a stone launched horizontally off a table — but they all collapse into the same underlying method once you stop treating them as one messy 2D problem and start treating them as two independent 1D problems happening at the same time.

Classic parabolic projectile trajectory

The one idea that makes everything else easy

Horizontal and vertical motion don't affect each other. Gravity pulls straight down, so it changes vertical velocity every second but has zero effect on horizontal velocity. This means you can solve the horizontal motion (constant velocity, no acceleration) and the vertical motion (constant acceleration, −g) as two completely separate problems, linked only by the fact that they share the same clock — the same value of t.

Almost every mistake in this chapter comes from accidentally mixing the two — using the initial speed u instead of its vertical component in a vertical-motion equation, for instance.

Step-by-step method

  1. Resolve the initial velocity into components first, before doing anything else. For a projectile launched at angle θ with speed u: horizontal component uₓ = u cosθ, vertical component u_y = u sinθ. Write both down before touching any formula.
  2. Handle vertical motion using the standard equations of motion, with a = −g (taking upward as positive): v_y = u_y − gt, and y = u_y·t − ½gt².
  3. Handle horizontal motion separately, with zero acceleration: x = uₓ·t. This is the easy half — velocity never changes.
  4. Use time (t) as the link between the two halves. If a question gives you the time of flight, plug it into both equations. If it doesn't, you'll usually need to find t from the vertical motion first (often by setting y=0 for a projectile landing back at launch height) before you can compute the horizontal range.

The three formulas worth memorizing (but also understanding)

Time of flight: T = 2u sinθ / g
Maximum height: H = u² sin²θ / (2g)
Horizontal range: R = u² sin(2θ) / g

Don't just memorize these — notice where they come from. Time of flight is exactly double the time to reach maximum height, because the upward and downward halves of the trajectory are symmetric (in the no-air-resistance case). Maximum height is just the standard v²=u²−2gh equation applied to the vertical component alone, solved for the point where vertical velocity becomes zero. Range is simply horizontal speed multiplied by total time of flight, with a bit of trigonometric simplification.

A genuinely useful pattern: complementary angles

A projectile launched at 30° and one launched at 60°, with the same initial speed, land at exactly the same horizontal range — because sin(60°) and sin(120°) are equal, and R depends on sin(2θ). This is a very commonly tested idea: for any launch angle θ, the complementary angle (90°−θ) gives the identical range. Only 45° gives the single maximum range, since it's the angle that equals its own complement.

Try this directly: launch a projectile at 30°, note the range, then try 60° with the same speed in the Projectile Motion simulation — the range lands in the same spot, even though the flight time and maximum height are completely different for the two angles.

Common mistakes to watch for

  • Using u instead of u sinθ (or u cosθ) directly in the equations of motion — always resolve first.
  • Forgetting that launch height and landing height might differ. The clean T=2u sinθ/g formula assumes the projectile lands at the same height it was launched from. If a ball is thrown from a building's roof and lands on the ground, you need the full quadratic y=u_y t−½gt², not the shortcut formula.
  • Ignoring air resistance assumptions. Every formula here assumes no air resistance — real projectiles (a badminton shuttle, for instance) deviate meaningfully from this idealized parabola, but NEET and JEE problems almost always specify or imply the idealized case unless stated otherwise.
Worked check: For u=20 m/s at 45°, the formulas give R=40.8 m, H=10.2 m, and T=2.89 s. Plug these same numbers into the simulation and you'll see the trajectory land at exactly 40.8 m — a useful way to build confidence that you're applying the formulas correctly before an exam, not just producing a number that looks plausible.

Practice this directly

Projectile Motion Equations of Motion (Graphical)