Electric field tells you the force on a charge. Electric potential tells you something quieter but just as useful: how much energy a charge has because of where it sits. Once this idea clicks, many numericals that looked like long vector sums turn into one line of addition.

A test charge moves in: V = kQ/r climbs as the distance shrinks

What potential actually means

The electric potential at a point is the work done by an external agent in bringing a unit positive charge from infinity to that point, without letting it speed up. It is a scalar, so there are no directions to track, only signs.

V = W/q   |   unit: volt (1 V = 1 J/C)   |   dimensions: [M L² T⁻³ A⁻¹]

For a point charge q, the potential at distance r is:

V = kq/r = q / (4πε₀r),   k = 9 × 10⁹ N m²/C²

A positive charge gives a positive potential and a negative charge a negative one. For several charges, add the potentials as plain numbers. That one fact is why potential is easier than field.

Example: a 2 μC charge, point 0.3 m away. V = 9 × 10⁹ × 2 × 10⁻⁶ / 0.3 = 6 × 10⁴ V = 60 kV.

Potential difference

What matters in practice is almost always the difference between two points, since the zero of potential is a matter of choice. The work done by the field in moving a charge q from A to B is:

W(A→B) = q (V_A − V_B)

In a uniform field E, the potential falls along the field lines at the rate E = −dV/dx. So a field of 200 V/m over a gap of 5 cm gives a potential difference of 200 × 0.05 = 10 V. Notice that the unit of field can be written as V/m, which is the same as N/C.

Potential energy of a pair of charges

U = k q₁ q₂ / r

Take q₁ = +5 μC and q₂ = −3 μC, 0.5 m apart. U = 9 × 10⁹ × 5 × 10⁻⁶ × (−3 × 10⁻⁶) / 0.5 = −0.27 J. The negative sign tells you the pair is bound: you would have to supply 0.27 J to pull them infinitely far apart.

The electron-volt

The energy a charge e gains falling through 1 V is 1 eV = 1.6 × 10⁻¹⁹ J. It is a unit of energy, not of potential, a mistake many students make.

An electron through 100 V starting from rest gains 100 eV. From ½mv² = eV, v = √(2eV/m) = √(2 × 1.6 × 10⁻¹⁹ × 100 / 9.11 × 10⁻³¹) ≈ 5.9 × 10⁶ m/s. This is how an old cathode-ray tube worked.

Equipotential surfaces

These are surfaces on which every point has the same potential. Three facts cover most questions. The field is always perpendicular to an equipotential surface. No work is done in moving a charge along it. And the surface of a conductor in electrostatic equilibrium is itself an equipotential. For a point charge, they are concentric spheres, spaced closer together where the field is stronger.

Mistakes that cost marks

Adding potentials of charges as vectors, forgetting the sign of a negative charge inside V = kq/r, and mixing up eV and volt. Also remember that zero potential does not mean zero field: at the midpoint of a dipole the potential is zero, but the field is not.

Try it yourself

Gauss Law & Equipotentials Electric Field Lines Parallel Plate Capacitor