Sadi Carnot published his analysis of ideal heat engines in 1824, at just 28 years old, years before anyone had worked out the first or second laws of thermodynamics in their modern form. His conclusion still stands unmodified two centuries later: no heat engine, built with any material or technology, can ever beat the efficiency limit that bears his name.
The formula, and what it's actually saying
T_h and T_c are the absolute temperatures (in kelvin) of the hot and cold reservoirs the engine operates between. Notice this formula mentions nothing about the working substance, the engine's mechanical design, friction, or any real-world imperfection — it's a limit set purely by the two temperatures involved, applying identically to a steam engine, a gas turbine, or any hypothetical future design.
Why 100% efficiency is impossible even in principle
Reading the formula directly: efficiency only reaches 100% if T_c is absolute zero. Since absolute zero is unreachable (a separate, well-established result called the third law of thermodynamics), Carnot efficiency can get arbitrarily close to 100% by working with an extremely cold sink, but never actually touch it. This is precisely why "waste heat" isn't an engineering failure to be fixed with a cleverer design — it's a mathematical requirement of extracting any useful work from a temperature difference at all.
Why raising the hot-side temperature helps more than lowering the cold side
Because T_c/T_h is a ratio, the same absolute temperature CHANGE produces a bigger efficiency gain when applied to whichever reservoir moves the ratio more — and in most real power plants, it's genuinely easier to raise the hot-side temperature (better furnace design, higher-pressure steam) than to lower the cold side much below ambient temperature (which itself costs energy via refrigeration). This is exactly why decades of power-plant engineering effort has gone into pushing boiler and turbine-inlet temperatures higher, rather than chasing colder condensers.
What a "Carnot engine" actually is — and why none exist
A genuine Carnot cycle requires each step to happen infinitely slowly (quasi-statically), so the working gas stays in thermodynamic equilibrium at every instant, with zero friction and zero heat lost to anything other than the two intended reservoirs. Infinitely slow means literally zero power output — a real engine has to move at a finite, practical speed, which unavoidably introduces some irreversibility (friction, turbulence, non-equilibrium heat flow) that a true Carnot cycle forbids. This is exactly why the Carnot limit functions as a genuinely useful theoretical ceiling to measure real engines against, rather than a design any factory has ever built or could build.
Why this matters beyond just steam engines
The same Carnot ceiling applies, run in reverse, to refrigerators and heat pumps — setting a hard limit on how much heat can be moved from cold to hot for a given input of work, regardless of whether the working fluid is Freon, ammonia, or something newer. It's precisely why a domestic refrigerator's real-world "coefficient of performance" is always compared against this same theoretical Carnot value to judge how close to ideal a given compressor design has actually gotten.
